01 Series | Hangers

01 Series hanger bearing 4 1/2 inch/115mm shaft diameter

Back to main menu

Hanger type

Hanger bearings are a compact means of supporting the shafts of screw conveyors and similar equipment. The hanger comprises of a split roller bearing in a cast iron split housing with a threaded boss to facilitate suspension from the conveyor cross bracing. A swivel fixing at the cross bracing joint is recommended to provide alignment of the bearings.

Double felt or lipped rubber seals are provided, air purge seals are also available. The aspect of sealing should be carefully considered for each application.

Continuous grease feed is sometimes desirable and provision made through hanger rods.

Hanger bearing
Shaft diameter (d)		Reference		C	G	L	H	X	Y	R	Wt. (lb.) (kg)
Shaft diameter (d)		Bearing only
inches	mm	inches	millimeters
1 1/4 1 1/2	40	01 BH 104 01 BH 108	01 BH 40	1.972 50.1	3 15/16 100	4 1/4 108	2 5/8 66	1 M30	2 50	4 1/8 105	9 4
1 11/16 1 3/4 1 15/16 2	50	01 EBH 111 01 EBH 112 01 EBH 115 01 EBH 200	01 EBH 50	2.192 55.7	4 5/8 117	4 1/4 108	3 76	1 M30	2 50	4 3/4 121	11 5
2 3/16 2 1/4 2 7/16 2 1/2	60 65	01 EBH 203 01 EBH 204 01 EBH 207 01 EBH 208	01 EBH 60 01 EBH 65	2.192 55.7	5 15/16 135	4 1/4 108	3 1/4 82	1 M30	2 50	5 3/8 137	13 6
2 11/16 2 3/4 2 15/16 3	70 75	01 EBH 211 01 EBH 212 01 EBH 215 01 EBH 300	01 EBH 70 01 EBH 75	2.410 61.2	6 3/16 157	5 1/8 130	3 5/8 92	1 M30	2 50	6 3/8 162	18 8
3 3/16 3 1/4 3 7/16 3 1/2	80 85 90	01 EBH 303 01 EBH 304 01 EBH 307 01 EBH 308	01 EBH 80 01 EBH 85 01 EBH 90	2.781 70.7	7 178	5 3/4 146	4 1/2 114	1 1/2 M36	3 76	7 3/8 187	29 13
3 11/16 3 3/4 3 15/16 4	100 105	01 EBH 311 01 EBH 312 01 EBH 315 01 EBH 400	01 EBH 100 01 EBH 105	3.188 81	8 203	6 152	5 128	1 1/2 M36	3 76	7 7/8 200	37 17
4 3/16 4 7/16 4 1/2	110 115	01 BH 403 01 BH 407 01 BH 408	01 BH 110 01 BH 115	3.342 84.9	9 1/8 232	6 1/8 156	5 1/2 140	1 1/2 M36	3 76	8 3/4 222	53 24