01 Series bearings, cartridges and pillow blocks 6 7/16 inch/160mm through 14 inches/340mm
Up to 6 in./155mm | 6 7/16 in./160mm to 14 in./340mm | 15 in./360mm to 24 in./600mm
Back to main menu


Roller Bearing & Cartridge Unit | Pillow Blocks


Roller Bearing   Cartridge Unit
Shaft diameter (d) Reference D C B Q Wt.
(lb.)
(kg)		 References Cartridge housing only G J L Available axial movement
Note (1)		 Wt.
(lb.)
(kg)
Bearing only Cartridge, bearing and seal
inches mm inches millimeters inches millimeters
6 7/16
6 1/2		 160 01 B 607
01 B 608		 01 B 160 10.750
273.05		 4.291
109.0		 2.375
60.3		 9.764
248.0		 45.0
20.0		 01 BC 607
01 BC 608		 01 BC 160 01 C 11 12 1/4
311.15		 3.0
76.0		 7 9/16
192.0		 3/4
19.05		 114.0
52.0
6 15/16
7		 170
180		 01 B 615
01 B 700		 01 B 170
01 B 180		 11.250
285.75		 4.291
109.0		 2.185
55.5		 10.236
260.0		 50.0
23.0		 01 BC 615
01 BC 700		 01 BC 170
01 BC 180		 01 C 12 12 3/4
323.85		 2 3/4
70.0		 7 7/8
200.0		 17/32
13.50		 120.0
54.0
7 15/16
8		 190
200		 01 B 715
01 B 800		 01 B 190
01 B 200		 12.250
311.15		 4.291
109.0		 2.375
60.3		 11.220
285.0		 56.0
25.0		 01 BC 715
01 BC 800		 01 BC 190
01 BC 200		 01 C 13 14 1/8
358.78		 3 3/8
86.0		 7 7/8
200.0		 3/4
19.05		 146.0
66.0
9 220 01 B 900 01 B 220 13.500
342.90		 4.528
115.0		 2.500
63.5		 12.402
315.0		 70.0
32.0		 01 BC 900 01 BC 220 01 C 14 15 1/4
387.35		 3 1/4
82.0		 8 1/2
216.0		 25/32
19.84		 170.0
78.0
10 240 01 B 1000 01 B 240 14.750
374.65		 4.803
122.0		 2.625
66.7		 13.543
344.0		 90.0
40.0		 01 BC 1000 01 BC 240 01 C 15 16 1/2
419.10		 3 1/2
90.0		 8 3/4
222.0		 29/32
23.02		 215.0
98.0
11 260
280		 01 B 1100 01 B 260
01 B 280		 16.000
406.40		 5.039
128.0		 2.719
69.0		 14.764
375.0		 110
50.0		 01 BC 1100 01 BC 260
01 BC 280		 01 C 16 17 7/8
454.0		 3 3/4
95.0		 9 1/8
232.0		 13/16
20.64		 265.0
120.0
12 300 01 B 1200 01 B 300 17.250
438.15		 5.625
143.0		 2.938
74.6		 15.906
404.0		 135.0
60.0		 01 BC 1200 01 BC 300 01 C 17 19 1/4
489.0		 3 7/8
98.0		 9 3/4
248.0		 1 1/32
26.19		 320.0
146.0
13 320 01 B 1300 01 B 320 18.250
463.55		 5.354
136.0		 2.938
74.6		 17.008
432.0		 160.0
72.0		 01 BC 1300 01 BC 320 01 C 18 20 1/2
520.70		 3 3/4
95.0		 10 1/2
266.0		 -
-		 390.0
178.0
14 340 01 B 1400 01 B 340 19.250
488.95		 5.354
136.0		 2.938
74.6		 17.953
456.0		 170.0
78.0		 01 BC 1400 01 BC 340 01 C 19 21 1/2
546.10		 3 7/8
98.0		 10 1/2
266.0		 -
-		 430.0
195.0

Add mm for millimeters and EX for expansion type or GR for fixed type to reference i.e. 01 B 200mm EX.

Chamfers
Inner race: 1/8 inches / 3mm
Outer race: 1/8 inches / 3mm

(1) Offset from centerline to accommodate axial movement should not exceed half this amount.
(2) Q diameter clears clamp rings.
For these dimensions please consult our technical department.



Pillow blocks
Shaft diameter (d) Reference Pedestal casting only H N *O P Bolts R S T Wt.
(lb.)
(kg)
Pillow block complete
inches mm inches millimeters Min Max
6 7/8
6 1/2		 160 01 BCP 607
01 BCP 608		 01 BCP 160 P11 8 3/8
213		 20
508		 7
178		 1 1/4
32		 4-1
M24		 14
356		 15
381		 4 1/2
114		 17
430		 248
113
6 15/16
6 1/2		 170
180		 01 BCP 615
01 BCP 700		 01 BCP 170
01 BCP 180		 P12 9 1/4
235		 21
534		 7 1/2
190		 1 3/8
35		 4-1
M24		 14 3/4
375		 15 3/4
400		 5
128		 18 1/2
470		 270
123
7 15/16
8		 190
200		 01 BCP 715
01 BCP 800		 01 BCP 190
01 BCP 200		 P13 9 3/4
248		 22 1/2
572		 8
204		 1 1/2
38		 4-1
M24		 16 1/8
410		 17 1/8
435		 5 1/2
140		 19 1/2
495		 340
154
9 220 01 BCP 900 01 BCP 220 P14 10 5/8
270		 25
636		 8 1/2
216		 1 5/8
40		 4-1 1/4
M30		 17 3/8
441		 18 7/8
480		 5 1/2
140		 21 1/4
540		 420
190
10 240 01 BCP 1000 01 BCP 240 P15 11 1/2
292		 27
686		 9
228		 1 3/4
44		 4-1 1/4
M30		 19
483		 20 1/2
521		 5 1/2
140		 23
585		 530
240
11 260
280		 01 BCP 1100 01 BCP 260
01 BCP 280		 P16 12 1/4
311		 28 1/2
724		 9
228		 1 7/8
48		 4-1 1/4
M30		 20 1/4
514		 21 3/4
552		 5 1/2
140		 24 1/2
620		 630
286
12 300 01 BCP 1200 01 BCP 300 P17 13 1/2
343		 30
762		 10
254		 2
50		 4-1 1/4
M30		 22 1/4
565		 23 3/4
603		 7
178		 27
685		 750
340
13 320 01 BCP 1300 01 BCP 320 P18 14 1/2
368		 32
812		 10
254		 2 1/8
54		 4-1 1/2
M36		 23 3/4
603		 25 1/4
641		 7
178		 29
735		 850
386
14 340 01 BCP 1400 01 BCP 340 P19 15 1/4
387		 33 1/2
850		 10
254		 2 1/4
57		 4-1 1/2
M36		 25
635		 26 1/2
673		 6 1/2
166		 30 1/2
775		 950
430

Add mm for millimeters and EX for expansion type or GR for fixed type to reference i.e. 01 BCP 300mm EX.


Up to 6 in./155mm | 6 7/16 in./160mm to 14 in./340mm | 15 in./360mm to 24 in./600mm
Back to main menu

 














Cooper Service Centers
USA and Mexico
The Cooper Split Roller Bearing Corp
5365 Robin Hood Road, Suite B
Norfolk, VA 23513
USA
Telephone 757 460 0925
Fax 757 464 3067
UK, Asia, Australasia and Middle East
Cooper Roller Bearings Co Ltd
Wisbech Road
King's Lynn
Norfolk PE30 5JX
England
Telephone +44 (0) 1553 763 447
Fax +44 (0) 1553 761 113
Europe and South America
Cooper Geteilte Rollenlager GmbH
Postfach 100 423
Oberbenrader Str 407
47704 Krefeld
Germany
Telephone +(49) 2151 713 016
Fax +(49) 2151 713 010
China
Cooper Beijing Office
Room 909, Canway Building tower 1,
No 66, Nanlishi Road,
Xicheng District, Beijing
Postcode:100045
Telephone 86-10-68080805 68080803
Fax 86-10-68080801
www.CooperBearings.com