Mounting Options

Two Bolt Base
1 3/16"/30mm to 3"/75mm. Available in cast iron, ductile iron or steel.

Four Bolt Base
3 3/16"/80mm to 6"/155mm. Available in cast iron, ductile iron or steel.

Four Bolt M-Line Base
3 3/16"/80mm to 6"/155mm. Available in ductile iron.

Large Bore Base
6 7/16"/160mm to 24"/600mm. Four and eight bolt bases. Available in cast iron, ductile iron or steel.

Take Up Tension
1 3/16"/30mm to 6"/155mm. Available in cast iron. Also offered as push type.

Rod End Shoe
1 3/16"/30mm to 6"/155mm. Available in cast iron. Also offered as tee type.

Round Flange Units
1 3/16"/30mm to 12"/300mm. Available in cast iron or steel.

Square Flange Units
1 11/16"/50mm to 3"/75mm. Available in cast iron, ductile iron or steel.

Hanger Unit
1 3/16"/30mm to 5 1/2"/140mm. Available in cast iron.

Flat thrust bearings
Flat thrust bearings are available in solid ring FT and split ring ET designs, they can be manufactured in bore sizes from 21/4" upwards. Available as unmounted units.

High speed bearings
High speed bearings are designed for high speeds and light loads, typically 26,000"/660,000mm dn or higher depending on the design. Supplied with or without the housing. Call for more information.

Watercooled bearings
Watercooled bearings are designed primarily for use in steel mill continuous casters. The low profile housing is either cast or fabricated steel. Call for more information.

Click here for Bearing types