Routine greasing and grease volumes

Back to main menu



Routine greasing

The following charts should be used to determine the frequency and amounts of grease required for routine greasing. Routine greasing depends on temperature, speed and environment. If the operating conditions fall outside the given limitations, please contact our technical department for a recommended lubrication interval.

If it can be done SAFELY, routine greasing should occur while the shaft is rotating to properly distribute grease. DO NOT mix different types of grease in the bearing.


Routing greasing frequency Temperature Speed *Environment
Every 100 hours
(if one of the conditions apply)
181°F to 350°F
80°C to 175°C
8000 to 12500dN
200,000 to 300,000mm
Very dirty/submerged
Every 200 hours
(if one of the conditions apply)
141°F to 180°F
60°C to 80°C
4000 to 8000dN
100,000 to 200,000mm
Dusty/splashed
Every 400 hours
(if one of the conditions apply)
Below 140°F
Below 60°C
0 to 4000dN
000,000 to 100,000mm
Clean/dry
* For applications where operating speed and temperature allow for full pack of grease, regreasing can occur every 400 hours regardless of the working environment. See Full pack grease volumes.

Routine grease volumes
Bearing bore Group size 01 Series 02 Series 03 Series
inches mm
1 3/16 to 1 1/2 30 to 40 108 1/8oz. 1/8oz. 1/8oz.
1 11/16 to 2 45 to 50 200 1/8oz. 1/8oz. 1/8oz.
2 11/16 to 3 70 to 75 300 1/8oz. 1/8oz. 1/8oz.
3 3/16 to 3 1/2 80 to 90 308 1/8oz. 1/8oz. 1/8oz.
3 11/16 to 4 95 to 105 400 1/8oz. 1/8oz. 1/8oz.
4 3/16 to 4 1/2 110 to 115 408 1/8oz. 1/8oz. 1/8oz.
4 11/16 to 5 120 to 130 500 1/8oz. 1/8oz. 1/8oz.
5 3/16 to 5 1/2 135 to 140 508 1/8oz. 1/8oz. 1/4oz.
5 11/16 to 6 1/8 145 to 155 600 1/8oz. 1/8oz. 1/4oz.
6 1/4 to 6 1/2 160 608 1/8oz. 1/4oz. 1/4oz.
6 11/16 to 7 180 700 1/8oz. 1/4oz. 1/4oz.
7 1/2 to 8 190 to 200 800 1/8oz. 1/4oz. 1/2oz.
8 1/2 to 9 1/8 210 to 230 900 1/8oz. 1/4oz. 1/2oz.
9 1/2 to 10 240 to 250 1000 1/4oz. 1/4oz. 1/2oz
10 1/2 to 11 1/8 275 to 280 1100 1/4oz. 1/2oz. 1/2oz.
11 1/2 to 12 300 1200 1/4oz. 1/2oz. 1/2oz.
12 1/2 to 13 320 to 330 1300 1/4oz. 1/2oz. 3/4oz.
13 1/2 to 14 1/8 340 to 350 1400 1/4oz. 1/2oz. 3/4oz.
14 1/2 to 15 380 1500 1/4oz. 1/2oz. 3/4oz.
15 1/2 to 16 410 1600 1/2oz. 1/2oz. 3/4oz.
16 1/2 to 17 420 1700 1/2oz. 1/2oz. 3/4oz.
17 1/2 to 18 1/4 460 1800 1/2oz. 3/4oz. 1oz.
18 1/2 to 19 480 1900 1/2oz. 3/4oz. 1oz.
19 1/2 to 20 500 2000 1/2oz. 3/4oz. 1oz.
20 1/2 to 21 520 to 530 2100 1/2oz. 3/4oz. 1oz.
21 1/2 to 22 550 to 560 2200 1/2oz. 3/4oz. 1oz.
22 1/2 to 23 580 2300 1/2oz. 3/4oz. 1oz.
23 1/2 to 24 600 2400 1/2oz. 3/4oz. 1oz.



Back to main menu 

 
















Cooper Service Centers
USA and Mexico
The Cooper Split Roller Bearing Corp
5365 Robin Hood Road, Suite B
Norfolk, VA 23513
USA
Telephone 757 460 0925
Fax 757 464 3067
Canada
Cooper - Grainger Canada Inc
5875 Coopers Avenue
Mississauga
Ontario L4Z 1R9
Canada
Telephone 905 890 2266
Fax 905 890 2269
UK, Asia, Australasia and Middle East
Cooper Roller Bearings Co Ltd
Wisbech Road
King's Lynn
Norfolk PE30 5JX
England
Telephone +44 (0) 1553 763 447
Fax +44 (0) 1553 761 113
Europe and South America
Cooper Geteilte Rollenlager GmbH
Postfach 100 423
Oberbenrader Str 407
47704 Krefeld
Germany
Telephone +(49) 2151 713 016
Fax +(49) 2151 713 010
www.CooperBearings.com