Installation guide
pg 1 | pg 2 | pg 3 | pg 4 | pg 5
Back to main menu


Screw torques (Ft-Lbs)
01 Series   02 Series   03 Series
Group size Clamp ring* Cartridge Pillow block Flange Group size Clamp ring* Cartridge Pillow block Flange Group size Clamp ring* Cartridge Pillow block Flange
108 & 200 3.5 2.5 20 20 200 6.5 5.0 39 39 400 52 39 165 -
208 3.5 2.5 39 39 208 6.5 5.0 66 66 408 52 39 165 -
300 3.5 2.5 66 66 300 11 8.3 165 66 500 52 39 165 525
308 6.5 5.0 165 66 308 11 8.3 165 165 508 52 39 311 -
400 11 8.3 165 165 400 11 8.3 311 165 600 52 39 311 525
408 11 8.3 311 165 408 & 500 26 20 311 311 608 88 66 311 -
500 11 8.3 311 311 508 & 600 26 20 311 525 700 88 66 311 525
508 & 600 26 20 311 311 608 & 700 52 39 311 525 708 & 800 88 66 525 -
608 & 700 26 20 165 311 800 - 1000 88 66 311 525 900 220 165 311 -
800 26 20 165 525 1100 - 1800 220 165 311 525 1000 220 165 311 525
900 52 39 165 525 1900 - 2400 415 311 525 - 1100 415 311 311 -
1000 - 1200 52 39 311 525   1200 415 311 311 -
1300 - 1900 88 66 311 - 1300 415 311 525 -
2000 - 2400 220 165 311 - 1400 700 311 525 -
  1500 700 311 525 -
1700 700 311 525 -
1800 700 311 525 -
2000 700 311 525 -
2200 & 2300 700 311 525 -
* For vertical shaft or high thrust applications, this value can be increased by up to 20%

Grease for initial installation

For a complete grease selection please contact our engineering department with the bearing number, operating speed (rpm) and surrounding temperature.

The initial charge of grease depends on the amount required for a full pack of the individual bearing and the operating speed. Speed in this case is expressed as dn (shaft diameter x RPM) and the amount of grease as a percentage of full pack.

Percentage of full pack
dn (inch) dn (mm) Percentage of full pack
over to over to
- 2,000 - 50,000 100
2,000 4,000 50,000 100,000 75
4,000 6,000 100,000 150,000 50
6,000 8,000 150,000 200,000 33
8,000 - 200,000 - 25

Caution: Do not mix different types of grease in the bearing.

Full pack grease volumes
inches mm Group size 01 Series 02 Series 03 Series
oz/lb Kg oz/lb Kg oz/lb Kg
1 3/16 to 1 1/2 30 to 40 108 2.0oz 0.06 - - - -
1 11/16 to 2 45 to 50 200 3.0oz 0.09 5.5oz 0.15 - -
2 3/16 to 2 1/2 55 to 65 208 5.3oz 0.15 7.5oz 0.21 - -
2 11/16 to 3 70 to 75 300 6.3oz 0.18 10.5oz 0.30 - -
3 3/16 to 3 1/2 80 to 90 308 10.5oz 0.30 1.0lb 0.45 - -
3 11/16 to 4 95 to 105 400 12.7oz 0.36 1.5lbs 0.60 2.6lbs 1.20
4 3/16 to 4 1/2 110 to 115 408 1.1lbs 0.51 2.0lbs 0.90 3.1lbs 1.40
4 11/16 to 5 120 to 130 500 1.3lbs 0.60 2.6lbs 1.20 3.1lbs 1.40
5 3/16 to 5 1/2 135 to 140 508 1.7lbs 0.78 3.1lbs 1.40 4.4lbs 2.00
5 11/16 to 6 1/8 145 to 155 600 2.0lbs 0.90 3.1lbs 1.40 6.0lbs 2.70
6 1/4 to 6 1/2 160 608 2.2lbs 1.00 3.1lbs 1.40 8.0lbs 3.60
6 11/16 to 7 180 700 2.6lbs 1.20 4.41lbs 2.00 9.2lbs 4.20
7 1/2 to 8 190 to 200 800 3.1lbs 1.40 6.0lbs 2.70 12.0lbs 5.40
8 1/2 to 9 1/8 210 to 230 900 3.1lbs 1.40 8.0lbs 3.60 15.0lbs 6.90
9 1/2 to 10 240 to 250 1000 4.4lbs 2.00 9.0lbs 4.20 18.0lbs 8.10
10 1/2 to 11 1/8 275 to 280 1100 4.4lbs 2.00 10.5lbs 4.80 22.0lbs 10.00
11 1/2 to 12 300 1200 4.4lbs 2.00 12.0lbs 5.40 24.2lbs 11.00

Geometry factors for bore sizes through 12"
inches mm Group size 01 Series 02 Series 03 Series
1 3/16 to 1 1/2 30 to 40 108 27.35 - -
1 11/16 to 2 45 to 50 200 37.62 38.96 -
2 3/16 to 2 1/2 55 to 65 208 48.83 53.24 -
2 11/16 to 3 70 to 75 300 62.34 67.14 76.98
3 3/16 to 3 1/2 80 to 90 308 78.59 83.67 97.66
3 11/16 to 4 95 to 105 400 94.10 101.26 112.28
4 3/16 to 4 1/2 110 to 115 408 112.34 119.81 127.49
4 11/16 to 5 120 to 130 500 129.39 139.28 143.27
5 3/16 to 5 1/2 135 to 140 508 147.30 157.51 159.59
5 11/16 to 6 1/8 145 to 155 600 163.75 176.43 180.71
6 1/4 to 6 1/2 160 608 182.85 198.17 211.57
6 11/16 to 7 180 700 200.37 216.10 232.14
7 1/2 to 8 190 to 200 800 236.79 258.09 277.45
8 1/2 to 9 1/8 210 to 230 900 277.45 279.23 327.65
9 1/2 to 10 240 to 250 1000 322.52 343.19 358.94
10 1/2 to 11 1/8 275 to 280 1100 364.24 385.66 1100E - 396.51
1100X - 412.95
11 1/2 to 12 300 1200 412.95 435.18 463.45


pg 1 | pg 2 | pg 3 | pg 4 | pg 5
Back to main menu 

 














Cooper Service Centers
USA and Mexico
The Cooper Split Roller Bearing Corp
5365 Robin Hood Road, Suite B
Norfolk, VA 23513
USA
Telephone 757 460 0925
Fax 757 464 3067
UK, Asia, Australasia and Middle East
Cooper Roller Bearings Co Ltd
Wisbech Road
King's Lynn
Norfolk PE30 5JX
England
Telephone +44 (0) 1553 763 447
Fax +44 (0) 1553 761 113
Europe and South America
Cooper Geteilte Rollenlager GmbH
Postfach 100 423
Oberbenrader Str 407
47704 Krefeld
Germany
Telephone +(49) 2151 713 016
Fax +(49) 2151 713 010
China
Cooper Beijing Office
Room 909, Canway Building tower 1,
No 66, Nanlishi Road,
Xicheng District, Beijing
Postcode:100045
Telephone 86-10-68080805 68080803
Fax 86-10-68080801
www.CooperBearings.com